BFPBY - HD-3475(FORMERLY H2-3475)
- MSDS: BFPBY
- Manufacturer: HYSOL DIV DEXTER CORP
- Product Name: HD-3475(FORMERLY H2-3475)
- National Stock Number: 8040-00-777-0632
Product Identification
Product ID:HD-3475(FORMERLY H2-3475)
MSDS Date:01/01/1985
FSC:8040
NIIN:00-777-0632
MSDS Number: BFPBY
Responsible Party
Emergency Phone: (716) 372-6300
Cage: KO004
Contractor
Telephone: 716-372-6300/6309
Cage: KO004
Ingredients
DIETHYLENE TRIAMINE
CAS: 111-40-0
RTECS: IE1225000
Fraction By Weight: >10%.
OSHA PEL 1 PPM
ACGIH TLV: S, 1 PPM; 9192
Hazards
Effects of Overexposure:CAUSES SEVERE EYE & SKIN BURNS
First Aid
First Aid:SKIN:WASH IMMEDIATELY W/SOAP & WATER.EYES:IMMEDIATLY FLUSH
W/WATER AT LEAST 15 MIN. CALL MD.
Fire Fighting
Flash Point:215F OC
Extinguishing Media:WATER SPRAY,DRY CHEMICAL,"ALCOHOL"FOAM,CO*2
Fire Fighting Procedures:COOL EXPOSED CONTAINERS W/WATER.SEE OTHER
PRECAUTIONS
Unusual Fire/Explosion Hazard:CARE MUST BE USED TO PREVENT IGNITION
WHEN PROCESSING OR HANDLING AT TEMPS ABOVE THE FLASH POINT
Accidental Release
Spill Release Procedures:SMALL AMOUNTS CAN BE FLUSHED AWAY WITH
WATER.LARGER SPILLS SHOULD BE SCRAPED UP,TRANSFER TO A METAL
CONTAINER
Handling
Handling and Storage Precautions:PROTECT FROM PHYSICAL DAMAGE.STORE IN
A COOL,DRY WELL VENTILATED AREA AWAY FROM ACUTE FIRE HAZARD.STRONG
SKIN SENSITIZER.AVOID SKIN CONTACT
Other Precautions:WATER SPRAY MAY BE USED DURING FIRE TO FLUSH SPILLS
AWAY FROM EXPOSURES AND TO DILUTE SPILLS TO NONFLAMMABLE MIXTURES
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTN IF
NECESSARY
Ventilation:DO NOT RECIRCULATE UNLESS SCRUBBED W/ACID.
Protective Gloves:PLASTIC/RUBBER
Eye Protection:GOGGLES IF SPLASH LIKELY
Other Protective Equipment:USE OF PROTECTIVE SKIN CREAM IS RECOMMENDED
Supplemental Safety and Health
VAPOR PRESSURE:<1 MMHG.PERCENT VOLATILE BY VOLUME:NIL.PRODUCT MAY BE
USED AS HARDENER FOR SEVERAL RESINS TO FORM INSULATING
MATERIAL.RESINS (BY SAME MFR):R8-2038,C8-4143,R9-2039,C9-4183
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:404F
Vapor Density:3.5
Spec Gravity:1.0
Solubility in Water:COMPLETE
Appearance and Odor:AMBER,MED.VISCOSTY LIQ;STRONG NH*3 LIKE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION W/STRONG ACIDS
Hazardous Decomposition Products:THERMAL DECOMP-HYDROGEN
CYANIDE,NITROGEN OXIDES,CO & CO*2
Conditions to Avoid Polymerization:MIXING LGE BATCH OF RESIN
W/PRODUCT-DEVELPMNT EXOTHERM HEAT
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOCAL STATE AND FEDERAL
REGULATIONS.MFR RECOMMENDS SOLIDIFY BEFORE LANDFILL BURIAL.MFR ALSO
RECOMMENDS THIS IS NOT A HAZARDOUS WASTE UNDER THE RESOURCE
CONSERVATION AND RECOVER Y ACT
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.